Request A Quote

About

BMP Pump Test Rig with Jib Crane: is a Testing Facility for gear pump in which we supply motor 3.7kw, motor 5.5kw with belt power transmission arrangement, vane pump, Reservoir 150ltrs, collection tank 50ltrs Unit as Per Technical Specifications.

  • The Ball valve (6.0) at the suction of charging pump is manually operated along with limit switch which tells us that the valve is open or close. The Collection Tank Filling Pump/Motor shall start only if this valve is open.
  • Electrical Motor (M2) of 3.7 kw for operating Charge pump(P1).
  • Vane pump with Displacement 22cm3/rev and maximum pressure 17.5 kg/cm2
  • Two Phase Electrical Motor (M1) of 5.5 kw for operating testing pump (17.0)
  • Filter Clogging Indicator Switch (13.0) which indicates that the Filter is clogged.
  • Heater (4.0) is used for increasing the temperature of oil in reservoir.
  • Temperature Sensors (RTD) (3.1) installed to monitor the tank Oil temperature.
  • Level Gauge (2.0) is mounted on tank which shows the level of hydraulic oil of tank.
  • Pressure Gauge (4.0) is mounted in pump delivery line which shows the pressure in delivery line.
  • Filler Breather (5.0) mounted over the tank whose function is to filter any air and enters inside the tank.

    • Image Gallery

    Technical Details

    • The Ball valve (6.0) at the suction of charging pump is manually operated along with limit switch which tells us that the valve is open or close. The Collection Tank Filling Pump/Motor shall start only if this valve is open.
    • Two Phase Electrical Motor (M2) of 3.7 kw for operating Charge pump
    • Vane pump with Displacement 22cm3/rev and maximum pressure 17.5 kg/cm2
    • Two Phase Electrical Motor (M1) of 5.5 kw for operating testing pump
    • Filter Clogging Indicator Switch (13.0) which indicates that the Filter is clogged
    • 6. Heater (4.0) is used for increasing the temperature of oil in reservoir.
    • 7. Temperature Sensors (RTD) (3.1) installed to monitor the tank Oil temperature.
    • 8. Level Gauge (2.0) is mounted on tank which shows the level of hydraulic oil of tank. .
    • Pressure Gauge (4.0) is mounted in pump delivery line which shows the pressure in delivery line..
    • Filler Breather (5.0) mounted over the tank whose function is to filter any air and enters inside the tank..
    • The Pressure transmitter (11.1, 11.2) is mounted which shows the pressure with the help of signal.
    • Relief valve (10.0) is mounted on delivery line to set the pressure range.
    • Testing pump fixture (17.0) in which pump is being test.
    • Needle valve at collection tank inlet.
    • 15. Ball Valve at inlet of testing pump for on off.
    BMP Pump Test Rig is a Testing Facility for BMP gear pump.

    Key Features

    • Electrical Motor of 3.7 kw for operating Charge pump
    • Vane pump with Displacement 22cm3/rev and maximum pressure 17.5 kg/cm2
    • Heater is used for increasing the temperature of oil in reservoir
    • Temperature Sensors (RTD) installed to monitor the tank Oil temperature
    • Filter Clogging Indicator Switch which indicates that the Filter is clogged
    • Level Gauge is mounted on tank which shows the level of hydraulic oil of tank.
    • Pressure Gauge is mounted in pump delivery line which shows the pressure in delivery line.

    Download Gallery

    Datasheet Product Catalog

    Engineering Design Documents

    PPT Gallery

    Video Gallery

    Social Media

    Our Products

    ×
    ×