2,000+ machines delivered.
One search bar.

Oxygen Charging & Distribution Vehicle (UGSSO2)

Mobile oxygen charging & distribution vehicle with dual-booster onboard boosting and multi-pressure servicing.

Hydraulic Servicing Trolley (HST 300U)

Mobile dual-system hydraulic servicing for fighter, transport and rotary-wing aircraft.

Nitrogen Cart with Booster

Air-driven mobile nitrogen booster to 415 kg/cm² with no electricity.

HST 300U Hydraulic Refilling Trolley

Towable nitrogen-driven hydraulic servicing unit delivering clean, de-aerated fluid at 300 bar.

Universal Hydraulic Charging Rig

The Universal Hydraulic Charging Rig is a rugged, portable system designed for precise,contamination-free replenishment of hydraulic circuits in both military…

Vehicle-Mounted Expandable Battery Command Post (BCP)

Containerised expandable C3 shelter on a TATA 2.5-ton GS truck — a war room on wheels.

Universal Self-Generating Nitrogen Service Cart (U-SGNSC)

Diesel-powered, membrane-based towable cart delivering on-demand >99.5% N₂ at 303 bar.

Mobile Aviation 400Hz Load Bank (Air-Cooled & Water-Cooled Versions)

The Neometrix Mobile Aviation 400 Hz Load Bank is a specialized test system designed for the validation and maintenance of 115/200 V, 400 Hz Ground Power Units…

Light Strike Vehicle Modification & Upgrade Program

Sealed, climate-controlled C3 conversion of the open-frame LSV for tactical communication missions.

Helicopter Washing Rig

Self-contained trailer-mounted washing rig — 200 bar plunger pumps, 1000 L SS tank, foam system.

Aircraft Tyre Nitrogen Charging Rig

Digital nitrogen tyre inflation rig with set-point charging and auto shutoff, twin 150 bar UHP cylinders.

Aircraft Access Ladders & Passenger Steps

Custom-built aircraft access ladders and towable passenger steps, built to buyer-approved drawings.

Aircraft Ground Air-Conditioning Cart (SAT-650)

Aircraft ground air-conditioning cart to DGAQA GE-279 — air-cycle cooling with no refrigerant.

Disabled Aircraft Recovery Kit (DARK)

Pneumatic air-lifting bags, hydraulic jacking and towing to lift a disabled aircraft and clear the runway, to ICAO Doc 9137 Part 5.

Aircraft Oxygen System

Ground oxygen charging, distribution and test system, with airborne regulator and mask delivery indigenised and integrated, oil-free end to end.

Aircraft Refueller & Fuel Bowser

Mobile aviation-fuel servicing vehicle — baffled tank, filter water separator and metered, deadman-controlled delivery, body-built onto a chassis to order.

Jet Air Starter Trolley

Towable ground air start cart rated on mass flow held at delivery pressure for hot-and-high days, sized in starts per hour to avoid hung or hot engine starts.

Aircraft Weighing & CG Measurement Systems

Jack-point and wheel-platform load-cell kits resolving aircraft weight and CG by moments, with component CG cradle fixtures for the same arithmetic at bench scale.

Engine Compressor Washing Rig

Mobile compressor washing rig delivering demineralised water and metered cleaner through engine-specific spray rings, recovering EGT margin with before/after proof.

Mobile Environmental Storage Container

Desiccant-dehumidified fleet storage containers holding RH below the corrosion threshold, sized on door-opening moisture load with generator-backed ride-through and logged history.

Aircraft Towbar & Towbarless Tug

Type-specific tow head on a universal beam, with a deliberate weakest-link shear pin protecting the nose gear — or a towbarless tug trading the fuse for an instrumented steering limit.

Mobile Air-Conditioning & Cooling Trolley

Sized on heat load and rated at the delivery end, not the outlet — duct loss counted as part of the machine, with capacity control and worst-credible-supply starting built in.

Aircraft Engine Pre-Heating Trolley

The engine is not afraid of the cold, it is afraid of its own oil — indirect heat ducted zone by zone to engine, cockpit and avionics bay, capped by thermostatic control so heat never becomes the hazard.

Oxygen Charging & Distribution Vehicle

Aviation oxygen replenishment for the flight line.

Ground Power Unit (45 kVA)

Trailer-mounted 45 kVA 400 Hz AC + 28 V DC ground power for aircraft servicing.

MANPADS Coolant Recharging Unit

Indigenous argon-boost station restoring MANPADS coolant reservoir assemblies to 6000 psig in ~5 minutes.

Hydraulic Servicing Trolley HST 120U

Compact dual-system hydraulic servicing trolley in a 2.3m frame, supplying two independent aircraft hydraulic systems simultaneously at up to 300 bar and 100 LPM per system.

Hydraulic Servicing Trolley HST 200D

Mobile dual-system aircraft hydraulic ground support trolley supplying continuous filtered oil to two independent aircraft systems at up to 300 bar and 100 LPM per system.

Hydraulic Test Pac With Chart Recorder

Portable air-driven hydraulic test pac with auto-stall at set pressure and integral Rototherm chart recorder, zero standby power draw.

Neometrix

Hydraulic Servicing Trolley (HST 300U)

The Universal Hydraulic Servicing Trolley (HST 300U) is an advanced aircraft ground support system designed for hydraulic servicing, maintenance, and testing…

Nitrogen Generation, Charging & Distribution Vehicle (UGSSN2)

Vehicle-mounted on-site nitrogen generation with high-pressure charging and distribution.

CO2 & N2 Filling System

Haskel-driven automated CO₂ (3400 PSI) and N₂ (4500 PSI) cylinder charging with HMI control.

Hydrogen Gas Boosting Station

Low-power glycol-driven hydrogen booster compressing 30 bar inlet to 150 bar output.

PSA Oxygen Generation Plant-500 LPM

Twin-tower PSA plant for continuous 93±3% medical-grade oxygen onsite.

PSA Oxygen Generation Plant-200 LPM

Onsite twin-tower PSA plant delivering 93±3% medical oxygen at 200 LPM.

PSA Nitrogen Generation Plant

On-site Pressure Swing Adsorption nitrogen at 95–99.99% purity.

Refrigeration System

High-pressure refrigerant recovery and recharging with >99% recovery efficiency.

Manual Nitrogen Generation Plant with Integrated Air Compressor

Diesel-driven PSA nitrogen plant with hydraulic booster for 200-bar cylinder filling.

Test Rig for OBIGGS (On-Board Inert Gas Generation System)

Ground qualification of aircraft OBIGGS — membrane integrity, inert-gas purity and response.

Oxygen Enrichment Facility

PSA-based high-altitude (5000 m) oxygen enrichment for hypoxia mitigation in extreme environments.

Gas Distribution System

Auto-changeover, sub-ppb purified gas delivery for analytical laboratories.

Halon Reclamation & Refilling Facility

Turnkey closed-loop Halon recovery and recharge to better than 98% purity.

Helium Charging Station

Decants, hydro-tests and refills helicopter emergency flotation bottles.

Nitrogen Gas Boosting System

Portable air-driven booster elevating nitrogen from 20–150 bar to 300 bar.

KU-7 Oxygen Tester

Mobile dual-range nitrogen leak tester for aircraft oxygen systems.

Gas Purging System

DRDO-qualified ultra-high-purity nitrogen purging for defence laser systems.

Liquid Oxygen Dispenser 800 Ltr (CRYO-800L-V-Oxygen)

Towable 800 L vacuum-insulated LOX dispenser with self-pressurizing delivery.

Cryogenic Liquid Medical Oxygen Vertical Storage Tank

Vacuum-insulated vertical LOX tank with low boil-off for medical and industrial supply.

Portable Single Cylinder Nitrogen

The Portable Single Cylinder Nitrogen Trolley with Booster is a mobile, powder-coated steel unit that uses a two-stage Haskel pneumatic booster to raise…

Oxygen Gas Boosting System

The Oxygen Gas Boosting System is a compact, skid-mounted pneumatic booster that elevates oxygen pressures up to 350 bar (≈5,000 psi) using only plant air,…

Oxygen Boosting System for Oxygen Generation Plant-PSA

The Oxygen Boosting System is a fully self-contained, skid-mounted solution that transforms low-pressure oxygen (3–6 bar) from PSA/VPSA units into…

Oxygen Component Test Benches

The Oxygen Component Test Benches are a complete suite of precision-engineered systems designed for the qualification, acceptance, and R&D testing of…

Burst Chamber for Hydrogen Cylinder Testing

The Burst Chamber for Hydrogen Cylinder Testing is the ultimate “crash test arena” for the hydrogen industry — a place where cylinders are pushed far beyond…

Advanced Life Support Oxygen Test Bench for Pilot Safety Systems

The Advanced Life Support Oxygen Test Bench is a precision-engineered testing platform developed to validate the reliability and safety of aircraft oxygen…

Nitrogen Cylinder Manifold Cum Pressure Control System

The Nitrogen Cylinder Manifold Cum Pressure Control System by Neometrix Defence Limited is a state-of-the-art solution engineered to ensure corrosion-free…

Hydrogen Power-to-Power (P2P) System

PEM electrolysis + solid-state H₂ storage + fuel cell — full P2P cycle in one lab cabinet.

Argon Heating & Cooling System

Dual-loop hot and cool argon conditioning for IFTM sodium-test thermal control.

Portable Liquid Nitrogen Container (Dewar)

SS 304 portable liquid nitrogen containers, 200-450 L, PESO-documented, trolley mounted.

Liquid Oxygen Tanker Vehicle

Mobile LOX replenishment — road tanker plus towable dispenser charging aircraft LOX converters.

Liquid Oxygen Storage Tank & Dewar

600 L vacuum-insulated LOX/LN2 storage tank, 250 L dewar and transfer hoses for rocket-propulsion test stands.

CNG Storage & Mobile Cascades

CNG cascades at 250 bar(g), 3,000-9,360 water litres, Type I steel or Type IV composite, stationary or mobile.

Hydrogen Refuelling Station

~150 kg/day hydrogen refuelling station, 500 bar storage, H35 dispensing, T20 pre-cooling to ISO 19880 and SAE J2601.

Mobile Gas Compression Unit

Towable trolley-mounted high-pressure air compressor, 90-350 bar, breathing-class purification, rated 0-4,500 m.

Hyperbaric & Saturation Diving Systems

Recompression chambers, saturation living chambers and heliox gas management, man-rated to PVHO-1, DNV/IRS classed.

Medical & Industrial Gas Pipeline Systems

Turnkey medical & industrial gas pipeline systems to ISO 7396-1 — triple-source supply, automatic changeover, nitrogen-purged copper distribution.

Green Hydrogen Generation Plant

MW-scale electrolyser integration and full balance of plant — rectifier, purification, drying to 99.999%, compression and storage.

Fuel-Cell Hybrid Power System

Silent, low-signature fuel-cell and battery hybrid field power on supplied hydrogen, delivering clean 230 VAC with no exhaust.

Underground FOL Storage Installation

Buried FOL tankage with cathodic protection, monitored interstitial leak detection and empty-condition anchorage, engineered and documented for PESO/CCOE approval.

Aviation Fuel Tanktainer

Cargo-rated tank containers for aviation turbine fuel — baffled sloped-floor tank, filter-water-separator polishing to clear-and-bright, bonded earthing, ISO frame for sea/rail/road.

Avalanche Airbag System

Separation, not flotation — inverse-segregation physics that makes the wearer a larger particle in a granular flow, engineered to fire once, cold, one-handed, in about two seconds.

Helicopter Oxygen System

A fighter feeds one pilot, a helicopter feeds the cabin — onboard bottles, crew regulators, passenger outlets, portable and casualty sets, engineered and indigenised for Mi-17-class transport helicopters.

Hybrid Solar-Battery-Generator Power System

A generator that idles is the most expensive way to make electricity — solar takes the day, the battery carries the night, and the generator runs only at a good load, then stops.

Helium Boosting & Decanting With Hydro Test Machine

Integrated system for high-pressure helium storage at 150 bar, automated boosting, precision decanting to 2 bar, and hydrostatic leak testing of reciprocating cylinders.

Nitrogen Purging System

Air-driven Haskel gas booster system boosting nitrogen or helium from 17-150 bar supply up to 750 kg/cm², for high-pressure nitrogen circuit leak testing.

Oxygen Changeover Panel — PSA to Manifold, for Gas Distribution

Automatic PSA-to-manifold oxygen changeover panel with pneumatic switch-over on PSA failure, separate hospital-bed and manifold connections, and automatic cycle reset.

Portable Oxygen Concentrator 10 LPM

Microprocessor-controlled PSA oxygen generator delivering 93%±3% purity at 10 LPM, up to 4 bar, for hospital and ward oxygen supply up to 5000m altitude.

CNG Priority Panels

Customized Priority Panels for testing and filling of CNG vehicles, built around a robust Priority Valve with SS 316 components from Ham-Let, Israel.

Special Gas Boosting System

Gas boosting and cylinder filling system for poisonous, flammable and mixed gases, equipped with gas detector, filling up to 120 bar or higher on request.

Hypoxic Gas Generators

Membrane-type hypoxic gas generator blending nitrogen and compressed air via mass flow controllers for on-demand altitude-equivalent oxygen, 3,000-40,000 ft.

Neometrix

Adsorption Medical Oxygen-130LPM

Adsorption Medical Oxygen-230LPM

Adsorption Medical Oxygen-80LPM

Neometrix

Bomb Shell Hydraulic Pressure Testing Machine (up to 1800 Bar)

Automated hydrostatic proof-test system for artillery shells and ordnance to 1800 bar.

Air Droppable Container

The Air Droppable Container (ADC) is an advanced aerial logistics solution designed for rapid, precise, and reliable supply delivery to naval ships, offshore…

Heavy Duty Automatic Single Row Weapon Disposal System

Dual-stage shred-and-melt destruction of firearms and military small arms.

Modern Universal Automatic Test Equipment

LabVIEW-based ATE for PCB, IC and electronic-component validation.

Copper Band Press for Ammunition Shell

1000-ton 12-cylinder press for copper driving-band swaging on artillery shells.

Set For Aero Engine Preservation

Portable trolley power pack for OM-11 corrosion-inhibiting preservation of aero engines.

MK-84 2000 lb Bomb Casing

Forged-steel general-purpose bomb body for free-fall and precision-guided munitions.

Practice Head Torpedo

Recoverable non-explosive torpedo nose mirroring live-warhead ballistics.

Neometrix Optical Balloon Theodolite

The Neometrix Optical Balloon Theodolite is a rugged, high-precision instrument designed to track pilot and ceiling balloons for meteorological, defense, and…

Neometrix SHS-600 Hydraulic Spreader

Portable 840 kN rescue spreader with dual pulling capability.

Weapon Loading Trolley

The Neometrix Weapon Loading Trolley is a rugged, hydraulically operated scissor lift designed to simplify and accelerate the handling of heavy munitions for…

Hydraulic Drive for OSA

The Hydraulic Drive for OSA systems is a compact, brushless electro-hydraulic actuator that converts 220 V/400 Hz electrical commands into precise, closed-loop…

Aircraft Arrester Barrier System

The Aircraft Arrester Barrier System (AABS) by Neometrix is a robust safety solution engineered to arrest military aircraft in aborted take-off or overshoot…

Chemical Cleaning Bay

The Chemical Cleaning Bay is a turnkey facility designed for precision surface preparation of industrial piping and components across marine, petrochemical,…

Integration Simulator

The Integration Simulator is a fully engineered, multi-zone test and training platform designed for the integration, validation, and evaluation of…

Modification of Command-and-Control Carrier Motor Track (CCC-MT)

Armored carrier transformed into an NBC-protected mobile battlefield headquarters.

Chemical Weapon Destruction Facility

Fully unmanned remote-controlled facility for safe chemical warhead neutralization.

Rudder & Tailplane Test Equipment

The Rudder & Tailplane Test Equipment is a high-precision hydraulic rig engineered to ensure the safety and performance of two of the most critical flight…

Aircraft Arresting Gear (AAG) System

High-energy net-based emergency runway arresting for fighter aircraft.

Missile Canister Transportation Module

The Missile Canister Transportation Module is not just a trolley – it sits right at the frontline of ground safety and combat readiness. Every time a live…

9×19mm Cartridge Case Manufacturing Line

Turnkey 9×19mm cartridge case plant — 8 integrated processes, Boxer & Berdan on one line.

Small-Arms Ammunition Components

7.62mm M13 belt links in service with the Indian Navy, plus turnkey 9×19mm cartridge case lines.

7.62mm M13 Disintegrating Belt Link

Manufacturer of 7.62×51mm M13 metallic belt links to CIA 4204, live-fired with zero stoppages.

Mobile Rectifier & Battery Charger Unit

Trailer-mounted 1520 kW mobile rectifier & battery charger, 24-pulse, marine NEMA 4X enclosure.

Munition Handling Trolley – Rocket Transport

60-rocket transport module on a 6-t three-axle chassis with double-Ackermann steering.

Optical System Integration on Mobile Platforms

Integration hardware and integration of optical systems on mobile platforms — structure, power, thermal, EMC.

Compact Damage Control Torch

Compact damage-control torch to the Indian Navy's SOTR — 3,000 lm, IP65, ≤3 kg.

T-72 Actuating Cylinder (Indigenisation)

Indigenised electro-hydraulic actuating cylinder for T-72 main equipment, engineered to customer drawing.

Double-Acting Blanking & Cupping Press

Double-action press blanking gilding-metal strip and deep-drawing small-arms bullet cups (5.56-9 mm) in one stroke.

Firing Training Simulators

Indoor marksmanship lanes with projected ballistics, laser-based force-on-force instrumentation and guided-missile gunnery trainers.

Ballistic Evaluation Testing Laboratory

Complete ballistic-evaluation laboratory to IS 17051:2018/NIJ 0106.06 — twin-gate velocity, yaw measurement, V50 and drop tests.

Vertical Nosing Press with Induction Heater

600-Ton class vertical hot-forging nosing press with interfaced induction heating and robotic loading, ~8 m frame.

Marine & Naval Hydraulic Deck Equipment

Hydraulically operated watertight doors, hatch covers and ramps, plus capstans, mooring winches and windlasses, classed to IRS/DNV/LRS.

Modular Ballistic Protection System

Modular bolt-on ballistic armour panels and protected enclosures, proof-tested to STANAG 4569, NIJ, EN and IS standards.

Vehicle Driving Simulator

Full-motion 6-DOF driving simulator with 210°+ wraparound visuals for zero-risk, scored driver training across terrain, weather and fault scenarios.

Field Technical Shelter

Transportable, environmentally-hardened ISO-frame shelter with HVAC, EMI/RFI shielding and NBC over-pressure for field command posts and technical equipment.

Counter-Drone (C-UAS) System

Layered counter-drone (C-UAS) prime integration — mobile/fixed platform, silent-watch power and systems integration around detect-decide-defeat sub-systems.

Telescopic & Hoistable Mast

Telescopic mast raising a communications, sensor or lighting payload to height and holding it steady, on a portable, vehicle or trailer base.

Armoured Recovery Vehicle Equipment

Hydraulic recovery equipment for armoured recovery vehicles — ~50-tonne main winch, crane, dozer/earth-anchor spade — no turret, no gun.

CBRN Decontamination & Collective Protection System

Hot-water CBRN decontamination and HEPA/carbon-filtered over-pressure collective protection against chemical, biological, radiological and nuclear contamination.

Living Accommodation Shelter

Turnkey light-gauge steel frame or insulated-panel living accommodation for officers, JCOs and other ranks, built dry and fast at plains and high-altitude posts.

Naval Steering Gear & Rudder System

Electro-hydraulic naval steering gear — ram or rotary-vane actuator, duplicated main/auxiliary power and telemotor bridge control, engineered and indigenised.

Marine Propulsion Shafting & Stern Gear

Ship's propulsion driveline — shaft line, plummer bearings, thrust block, stern tube and seals, engineered, machined, installed and aligned to classification rules.

Shipboard Helicopter Traversing & Handling System

Deck-lock securing grid, flush rails, capture shuttle and drive walking a naval helicopter restrained from touchdown to hangar, with NVG-compatible deck lighting.

Damage-Control & Fire-Fighting Training Facility

Ashore flood-training chamber, gas-fuelled fire trainer and smoke gallery for instructor-controlled damage-control and fire-fighting training, safe by design.

Boat Davit & Launch-and-Recovery System

Gravity, luffing and slewing boat davits and A-frame launch-and-recovery systems, blackout-capable launch and constant-tension recovery, proof-loaded to 2.2× SWL.

Marine & Industrial Incinerator

Shipboard MARPOL-pattern incinerators and rotary-kiln industrial incinerators with 850°C/2s secondary-chamber burnout and scrubbed, CEMS-monitored stack.

Replenishment-at-Sea & Fuelling-at-Sea System

Jackstay stores rigs and spanwire fuel rigs with constant-tension winches and designed-in breakaway couplings, transferring fuel and stores between two ships underway.

Automated Target & Shot-Location System

LOMAH acoustic shot-location system placing hit and miss to millimetre class, with turning, falling and running target mechanisms and instant per-firer scoring.

Ammunition Packing & Container Line

Automatic cartoning lines, hermetic steel containers and leak-test benches — the last stations of an ammunition factory, sealing the round dry, still and identified for a decade.

Screw Filling Machine

Gravimetric screw metering and load-cell-verified filling of large-calibre shells, remotely operated with automatic accept/reject and conversion between shell natures.

Mobile Battery-Operated Chain Conveyor

Self-propelled, battery-driven chain conveyor that goes to the wagon door with no civil work, running a cleated slat bed both ways to win back depot loading hours.

Composition Filling & Assembling Machine

17-station gravimetric filling and torque-closing line, ±2g dosing and ±0.1 Nm torque accuracy at up to 500 units/hour, delivered against a won order.

EO/IR Payload Mounts & Boresight Equipment

Precision EO/IR payload mounts, retraction mechanisms and boresight equipment engineered to a pointing-error budget, with theodolite and collimator alignment to certificate.

Recoil System Test Rig

Servo-hydraulic recoil system test rig characterising buffer and recuperator force-stroke-velocity curves across temperature, with a reaction structure stiff enough to trust.

Crash-Rated Bollards & Vehicle Barriers

Rated configuration, not a part number — post, foundation, spacing and reinforcement proven together by a live crash test, with drainage, seals and fail-safe behaviour deciding service life.

Naval & Land Switchboards

Sized on prospective short-circuit current, not running load — bar spacing and bracing proven by withstand test, with a coordination study for discrimination and segregated live-maintenance access.

Automatic Tray Retrieval System

Checkpoint throughput machine solving circulation, not inspection — a tray always ready at the front, guarded and fail-safe for public-queue use, built around fast, non-stopping jam clearance.

Integrated Ballast & Trim Control System

A stability system, not a plumbing one — the console checks commanded valve states against the stability model before anything opens, refuses cross-connections, and fails to a safe state.

Aerial Work Platform & Boom Lift

Rated by a load-moment envelope, not a single number — geometry sensed continuously, motion cut before the edge, and a no-power gravity descent for the rescue case of an operator who cannot operate.

Vehicle Accident-Prevention System Retrofit

The integration is the product — rigid jigged mounting, conditioned power and non-invasive fit onto a fleet vehicle never designed for sensors, with per-vehicle calibration proven on a track before it counts.

Ammunition Demilitarisation Plant

A cold-process front end — abrasive waterjet access cutting and high-pressure washout that feed a downstream destruction or recovery stage, governed by remote operation, a barricade and one-way material flow.

Air Traffic Management Upgrades

An airfield cannot close for its own upgrade — the new system goes in beside the old, is proven on the ground and from the air, then takes over in a planned cutover with fall-back held ready.

Anti-Drone Mission Vehicle

The payload is bought in, the vehicle is ours — carrier, hoistable mast and stabilised pointing pedestal, silent-watch hybrid power and operator cabin fielding specialist sensors and defeat payloads as one vehicle.

Automated Stores Handling & Retrieval System

A depot is a promise: the right item, today — engineered racking, stacker cranes or shuttles and a management layer replacing search with an address, migrated aisle by aisle while the depot keeps running.

Precast Underground Bunker

The bunker is the concrete and the soil — a buried precast arch on a drained base, with layered two-sided backfill, protected openings and integrated air, power and climate as one system.

Precision Bearings & Slewing Rings

Hardening does not finish the raceway, it moves it — forged ring blank, induction-hardened and ground true again, with gear teeth cut where the ring also drives the assembly it carries.

Tactical Water Bowser & Distribution System

The full tank is not the dangerous one, the half-empty one is — a baffled tank tamed across fill levels, with one self-priming pump running drafting and delivery in either direction.

Disaster Relief Community Shelter

The best shelter is not the strongest one, it is the one that gets there — flat-packed for the fewest truck loads, foundation-free, erected by a small crew without heavy equipment and redeployed after use.

Heavy Vehicle Loading Ramp & Restraint Kit

The transporter is hired, so the kit brings its own strength — adjustable stiff-beam ramps, bearing plates spreading load into soft ground, and calculated restraint fixed through the kit's own anchors.

Anti-Drone Screen

It only has to be in the way, and still be standing — a mesh fine enough to stop the drone on a structure strong enough for the wind that same mesh now catches, sealed at ground level.

Fibre-Optic Intrusion Detection System

A cable that can hear — one optical fibre becomes a continuous row of listening points, locating each disturbance along the route and telling a dig from the weather.

Hydraulic Jacking System

Oil lifts, steel holds — small level lifts with several jacks rising together, then the load handed from the oil to a lock nut or steel packing before anyone works near it.

Hydraulic Rescue Tool Power Unit

Soon at work, safely let go — a staged pump giving flow first and force last, a dead-man control that stops the tool the moment the hand lets go, and a relief valve set and shown on the real tools.

Hydraulic Jack Machine

Portable double-acting hydraulic re-railing (tilting) jack lifting derailed rolling stock to 212 kN at 490 bar, with pilot-operated check valves and dual overload safety valves.

Lock Loading Test Rig

Self-contained hook-proving rig for ERU119 & ERU120 ejection release units, LVDT displacement sensing and automatic OK/NG verdict to 63,000 lbf.

CM Transportation Module

Fully mechanical, wheeled ground-handling trolley moving 4 canisterised missiles at 1,400 kg in one lift, with a 2-person crew and no powered assistance.

Aircraft Arrester Barrier System

Net- and pendant-type runway arrestment for military aircraft.

Bomb Shell Hydraulic Pressure Testing Machine Upto 1200-1800-Bar

Advanced Pressure Testing Solutions for Artillery and Cryogenic Applications Modern defense and industrial sectors rely on high-pressure testing equipment to…

Bomb Shell Hydraulic Pressure Testing Machine Upto 1200-1800-Bar

Advanced Pressure Testing Solutions for Artillery and Cryogenic Applications Modern defense and industrial sectors rely on high-pressure testing equipment to…

Bomb Shell Hydraulic Pressure Testing Machine Upto 1200-1800-Bar

Advanced Pressure Testing Solutions for Artillery and Cryogenic Applications Modern defense and industrial sectors rely on high-pressure testing equipment to…

CCTV Surveillance System Including Sensor For Infrastructure Protection

Hydraulic Cutter Machine

inhibition-rig

70000 RPM Aerospace Bearing Test Rig

The High Speed Bearing Endurance Test Rig is a specialised life-testing bench designed to push high-speed rolling bearings to their limits under realistic,…

Starter Generator Test Rig

Programmable multi-brand bench for aircraft starter-generators — DC brush to 270 V HVDC.

Aerospace Nozzle Flow Test Bench

Precision mass-flow and directional validation of aerospace nozzles under thermostatic oil control.

Combined Control Unit Test Bench

Automated servo-hydraulic actuator validation for MI-8 helicopters and fighter aircraft.

Aerospace Pressure and Leak Test Rig

Three-circuit pressure-loss and micro-leak detection rig for aerospace fluid systems.

Computerized Diesel Fuel Injection Pump Test Rig

Microprocessor-controlled calibration of diesel fuel-injection pumps to ±0.5% accuracy.

Drive and Control Automation System

250 kW closed-loop ALH Main Gear Box test rig with hydraulic load simulation.

Main Rotor Actuator Test Rig

Hydraulic and electromechanical validation of rotor actuators for combat helicopters.

PC-Based Counter Timer Test Rig

HAL-standard timing, voltage and current validation for APD-99 avionics.

Integrated Test Rig for Pumps and Fuel Coolers

Multi-unit aero-engine rig validating LP/HP/Oil pumps and FCOC before engine build.

Modified Test Rig for NSH-39M

The Modified Test Rig for NSH-39M is a sophisticated, fully automated and manually operable testing platform specifically engineered for the performance…

Environmental Control System (ECS) Test Bench – Model A0624

Ground simulation of bleed, ram and conditioned air for aircraft ECS qualification.

Testing & Charging Test Rig for Main & Nose Landing Gears

Skid-mounted, air-powered rig for shock absorber testing, N2 charging, leak testing and bleeding.

Pneumatic Test Rig (Vacuum)

Dual-chamber altitude simulation to 60,000 ft for aerospace valve testing.

1000 HP Cyclic Spin Test Facility

Vertical-axis spin testbed to 24,000 RPM for rotor burst and fatigue.

Mobile Test Facility for Aircraft Engines

Trailer-mounted, self-contained propulsion test facility for turbo-engines up to 450 kgf.

Test Rig for Running-In & Calibration of Reheat & Nozzle Control Units

Turnkey facility validating turbine fuel-control units sea-level to altitude at ±0.25%.

Test Equipment for Pump & Centrifugal Breather

Dual-mode PLC-controlled P-Q performance testing and preservation for aerospace lubrication pumps.

TACAN Unit Test Bench

Turnkey automated FAT for Moog Fernau TACAN 2010 navigation modules.

DOPPLER VOR TEST RACK

The DOPPLER VOR TEST RACK is an integrated, rack-mount test bench designed for comprehensive validation of Doppler VHF Omnidirectional Range (DVOR) navigation…

Inertial Loading Test Facility

The Inertial Loading Test Facility is a fully integrated hydraulic test rig engineered to replicate the true inertial forces experienced by actuators,…

Advanced Test & Calibration Bench for Integrated Fuel Pump and Controller in Aircraft Engines

Hydraulic, pneumatic and electrical simulation for aircraft fuel-pump/controller calibration.

Aerospace Hydraulic Pump / Motor Test Bench

The Aerospace Hydraulic Pump / Hydraulic Motor Test Bench is a fully automated, precision-engineered validation system that plays a decisive role in ensuring…

Fuel (ATF) Pump and Nozzle Pressure Ratio Test Stand

In modern aerospace, the fuel system is the lifeline of an aircraft.

Fuel Contents Gauging Probe Test Rig — Light Combat Helicopter

Wet functional and electrical-integrity validation of LCH fuel-gauging probes and switches.

Aerospace Fuel Supply System

The Aerospace Fuel Supply System by Neometrix Defence Limited is a precision- engineered fuel conditioning and delivery platform developed for aero-engine and

Engine Test Cell Data Acquisition System

Time-synchronized multi-cell DAS unifying thermals, mechanics, vibration and video into a single audit-grade stream.

Aircraft Servo Valve Hydraulic Test Equipment

Engine-equivalent ATF conditions for flight-critical servo valve validation.

Aircraft Aggregate Flushing Rig

The Aircraft Aggregate Flushing Rig by Neometrix Defence Limited is a high-precision maintenance and qualification system engineered to safeguard the…

LP Shaft Torsion Fatigue Testing Machine

Full-scale instrumented torsion-fatigue rig for aero-engine LP shafts at elevated temperature.

Aircraft Electro-Hydraulic Multi-Channel Power Drive Loading Rig

In aviation, the difference between a flawless actuator response and a millisecond hesitation can define the line between mission success and catastrophic…

Integrated Aircraft Hydraulic Reservoir, Intensifier & Control Module

The Integrated Aircraft Hydraulic Reservoir, Intensifier & Control Module is essentially the “hydraulic brain and heart” of the helicopter, quietly making sure…

Visual Search Kit

MIL-PRF-13830B inspection set for AH-64E Apache IR dome surfaces with loupes and UV illumination.

Mass Properties Measuring Instrument (MPMI)

Mass, centre of gravity, moment & product of inertia on one machine — ten parameters, one platform.

Dynamic Motion & Tilt Test Platform

Six electro-mechanical actuators, platform-kinematics control and real-time data acquisition for heavy-payload motion replay.

Hangar Fire Test Facility

40 × 15 × 10 m fire simulation chamber for validating hangar fire-fighting systems, with metered LDO/LPG ignition and SCADA control.

Climatic & Environmental Test Chambers

Climatic and environmental test chambers from -70°C to +150°C, 10-98% RH, uniformity ±2°C at nine points.

EMI/EMC Test Laboratory

Semi-anechoic EMI/EMC chambers with ≥100 dB shielding, NSA ±4 dB, MIL-STD-461 and CISPR test suites.

Aerospace Assembly Jigs & Form Block Tooling

Form blocks, trim jigs, chemical milling templates and assembly jigs, stress-relieved steel, laser-tracker certified to ±0.08 mm.

Ground Air Supply Station

Engine test cell air supply — screw compressor plant, open-yard storage farm, 2.0 kg/s regulated blow-down at 4 kg/cm².

Dynamic Turret Test Rig

Six-axis motion-platform rig that tunes armoured-fighting-vehicle gun-control and stabilisation systems.

Aerospace & Industrial Autoclave

Heated pressure vessels curing composites to 10 bar and 420°C, temperature uniformity ±3°C, ASME VIII coded to AMS 2750.

Thermal Vacuum Chamber

High vacuum to ~10⁻⁶ mbar with LN2/GN2 radiative thermal shrouds from -180 to +150°C for satellite thermal-vacuum qualification.

Vibration & Shock Test System

Electrodynamic shaker with power amplifier, vibration controller, slip table and head expander for random, sine, shock and SRS testing.

Ejection Seat & Aircrew Escape Test Facility

Ground-based qualification of aircrew ejection seats — functional sequencing, drop/static crashworthiness, and ATD-measured occupant injury loads.

Servo-Hydraulic Fatigue & Structural Test System

Servo-hydraulic dynamic test frame for static, S-N fatigue, crack-growth and structural proof testing to ~1000 kN, closed-loop to ASTM/ISO.

UAS Propulsion & Flight-Readiness Test Bench

Thrust stand, 3-DOF attitude rig and readiness bench characterising UAS motor, propeller, ESC and flight controller before first flight, caged and calibrated.

Materials Impact Testing Machine

Calibrated pendulum, instrumented drop-tower and conditioned impact testing to ASTM E23/ISO 148, finding the ductile-brittle transition down to -196°C.

Fire Resistance Test Rig

Furnace, restraint frame and instrumented loading rig rating building elements to ISO 834/BS 476, deciding R, E and I criteria and the minute each one fails.

Antenna Test Facility Positioners & Scanners

Precision antenna-range mechanics — roll-over-azimuth positioners and planar scanners holding phase-critical geometry to λ/100, laser-tracker verified, around a shielded anechoic chamber.

Helicopter Main Gearbox Load Test Rig

Back-to-back torque-loop rig proving helicopter main gearboxes under combined torque, mast and tail loading, including a run-dry certification case with the case still turning.

Shock Qualification & Shock Test Machines

MIL-S-901 geometry hammer machines, guided drop and pneumatic tables, and bump machines qualifying naval equipment to a functional pass after 10-300g shock pulses.

Dynamic Balancing Machines

Hard-bearing, vertical and high-speed dynamic balancing machines correcting rotor unbalance to ISO 21940 grade, verified at service speed with Umar and URR machine proof.

Aircraft Landing-Gear Shock Absorber & Oleo Struts

Oleo-pneumatic landing-gear strut characterisation, manufacture, drop-test qualification and overhaul for legacy transport fleets, with in-house-built drop, pressure and endurance rigs.

Large Cavitation Tunnel Facility

Variable-pressure closed-circuit cavitation tunnel matching cavitation number σ, with vacuum/degassing plant, dynamometry, high-speed imaging and hydrophone acoustics.

Fire & Overheat Detection System Test Rig

Calibrated-heat test rig proving aircraft fire and overheat detection loops alarm at threshold and stay silent everywhere else, with fault-vs-fire signature discrimination.

Iron Bird Aircraft Systems Integration Rig

Aircraft hydraulics, flight controls, landing gear and electrical power mounted at true geometry on steel, flown by real inceptors against hinge-moment load jacks, years before first flight.

Retractable Refuelling Probe Test Rig

Probe qualification rig reproducing the interface stiffness, closing-speed impact and misalignment of live engagement, cycling past declared life while flowing fluid through a loaded, moving, cold joint.

Airborne Vapour Compression System

Ram-air-rejecting refrigeration pack sized to the worst point of the flight envelope, judged on kilowatts per kilogram, with leak rate and oil return as qualification items, not commissioning notes.

Salt Spray & Corrosion Test Chamber

Dispersion-tower salt fog chamber holding fog uniformity, collection rate, concentration, pH and temperature together, with automatic refill and alarms for unattended multi-week runs.

Aircraft Component Overhaul Test Benches

A bench can be perfect and still prove nothing — the approval status of the data it tests against decides the outcome, with reverse engineering as the named route where original design data is missing.

Flight Simulator Upgrades

A simulator ages in its computers, not its cockpit — keep the airframe-representative hardware, replace compute and visuals with XR, a flight-test-matched model and an open HLA network of five stations.

Small Gas Turbine Engine Test Bench

One measuring line for the whole engine — a flexure thrust stand reading true thrust, machine-logic start and control, and every number synchronised on one timeline, fixed in a cell or trailer-mounted to the work.

Drone Training Simulator

The only flight you can repeat is a simulated one — head-tracked VR with the pilot's real hand controller, flight models checked against logs, and an instructor station that mirrors every headset live.

Heated & Cold Fuel Supply Rig

Fuel is not one liquid, it is a different liquid at every temperature — a conditioned supply that soaks the whole loop cold or hot, blankets it with nitrogen and measures mass flow directly.

Engine Anti-Ice & Bleed-Air Valve Test Rig

A valve that lives in hot air is not tested until it has been tested in hot air — a flow-protected heater, a valve fixture as on the engine, and one-clock logging of open, speed and shut-tight leakage.

Spring Testing Machine

A spring's rate is the easy number, whether it comes back is the one that decides its life — loaded, released and cycled with a load cell matched to the spring, not just the frame.

Aircraft Fuel System Test Rig

A fuel system fails when a manoeuvre uncovers the pickup for an instant, not when the tank runs dry — a tilting attitude table testing feed, gauging and venting together at low fuel states.

Air Data Test Set

Speed and height are just pressures — static and pitot held together with programmable limits on how fast they move, and a timed hold at every point that shows a leak.

Precision Inclinometer

Prove the zero, hold it still — an instrument whose zero is proved by turning it end for end, read only when still, and checked against a sine bar and gauge blocks across its range.

Dust and Sand Test Chamber

Dust goes where the air goes — a steady dust cloud, air drawn through the leaks by a partial vacuum, and a verdict found by opening the item and looking.

Test Equipment for Aircraft Fuel Pump

Bench test set for aircraft fuel pumps — Model A4135 — proving delivery pressure and flow against the pump's rated points before it is cleared for the airframe.

Fuel Pump Test Rig

PLC-driven closed-loop rig for cold-start to high-temperature pump validation.

Boot Strap Reservoir

The Boot Strap Reservoir is essentially the “hydraulic brain and heart” of the helicopter, quietly making sure everything you take for granted actually works…

Altitude Switch Test Rig

Aviation test rig evaluating the performance, accuracy and durability of the altitude switch used in the IJT-LSP project, MIL-grade construction, calibrated instruments.

ATF Fuel Pump Test Rig DTSN-82

Precision running-in and performance testing of the centrifugal fuel booster pump DTSN-82 using Aviation Turbine Fuel, at varied inlet pressure, flow and drive RPM.

Tail Rotor Actuator Test Rig

Precision test rig for verification of Main Rotor Actuators (Pitch, Roll & Collective) and Tail Rotor Actuator performance parameters on the Light Combat Helicopter.

Test Rig for 130 LPM Pump of LCA

Self-contained electro-hydraulic test rig for complete performance testing of the 130 LPM hydraulic pump of the Light Combat Aircraft, Moog servo valves, MIL-H-5606E oil circuit.

Hydraulic Test Rig HS-748

Self-contained dual-system electro-hydraulic test rig for HS-748 aircraft hydraulic components, two independent 207 bar/94.5 LPM systems for two operators.

70 000 RPM Aerospace Bearing Test Rig

Ultra-high-speed combined-load bearing life test system.

70000 RPM Bearing Test Rig

First time in India, 70000 RPM Bearing Endurance Test Rig has been designed & manufactured by Neometrix. The Test Rig is fully computerized, complete with FFT…

Cold Air Unit Test Bench

Fuel (ATF) Pump Test Stand

Nozzle Pressure Ratio Control Test Rig

Neometrix

Rotor Dynamics Test Facility

High-speed rotor-bearing evaluation — critical speed, unbalance and damping to 52,000 rpm.

Computerized Control Universal Brake Test Bench

PLC-DAQ universal bench validating 27 pneumatic brake valve types for metro and Indian Railways.

Hydraulic Suspension Unit Test Bench

Servo-hydraulic static and dynamic validation of hydro-pneumatic suspension units.

Computerized Microprocessor Controlled DV Test Bench

Automated testing of railway distributor valves with DAQ and RDSO-compliant reporting.

Computerized Based Test Bench For Panel Mounted Brake System For LHB Coaches

PC-automated validation of 18 pneumatic brake valve types for LHB coaches.

Hydraulic Damper Test Bench

Jounce/rebound validation of damper assemblies up to 150 bar and 200 LPM.

Fuel Consumption Measurement System

Skid-mounted load-cell rig for precise locomotive fuel efficiency testing.

Head Impact Test Rig

Servo-hydraulic headrest impact simulation up to 250 km/hr for occupant-protection validation.

Control Valve Test Rig (Automobile)

Electro-hydraulic validation of off-highway hydraulic control valves with automated reporting.

CNG Vigilant

Automated leak testing for complete CNG vehicle circuits to 350 bar.

Compressor Test Rig

Closed-loop oil-flooded screw compressor rig for lubricant performance testing.

E-70 Brake Equipment Test Rig

Automated hydraulic and pneumatic validation of locomotive E-70 brake equipment.

Gear Box Test Bench

Skid-mounted gearbox validation with IIoT, condition monitoring and reporting.

CNG Circuit Leak Tester

PLC-controlled nitrogen leak tester for vehicle CNG fuel circuits.

CNG Regulator Test Bench

Automated life-cycle and leak validation of CNG regulators to ISO 15500 / FMVSS 303.

45° Left & Right Moment Durability Test Rig

The 45° Left & Right Moment Durability Test Rig is a fully integrated, servo-hydraulic system engineered to apply precise, alternating bending moments at a…

CNG Circuit Leak Testing Machine

The CNG Circuit Leak Testing Machine by Neometrix Defence Limited is a state-of-the-art pneumatic system designed for high-pressure testing, leak detection,…

Power Shuttle Transmission Test Rig (ARJUN NOVO)

Automated end-of-line PST validation with triple-channel monitoring.

CNG High Pressure Regulator Test Bench

The CNG High-Pressure Regulator Test Bench is a mobile, PLC-controlled system designed for rigorous endurance and leak testing of CNG pressure regulators. It…

Test Rig for IRAB Brake System

Automated pneumatic validation of all 18 IRAB locomotive brake-valve types, RDSO-compliant.

Water Leak Testing System for Standard- and Broad-Gauge Rolling Stock

25-m SS chamber with 252-nozzle storm-simulation array for full-scale coach watertightness validation.

High-Pressure Air Compressor Test Stand

400-bar qualification platform for naval, aerospace and industrial multi-stage reciprocating compressors.

Electrical & Hydraulic System for the Side Gear Box (LH & RH) Test Rig

The Electrical & Hydraulic System for the Side Gear Box (LH & RH) Test Rig is a fully engineered test facility developed to qualify side gear boxes for tracked…

Hydro-Gas Suspension (HSU) Validation System

The Neometrix Hydro-Gas Suspension Test Rig stands at the critical intersection of heavy armor and high-precision engineering—the decisive checkpoint for…

Motorized Torque Wrench Calibrator

Computerized calibration bench for torsion beam and spring-type torque wrenches up to 500 Nm.

Multipurpose Fuel Injection Pump Test Rig

Thyristor-controlled DC drive test rig for inline FIPs, rotary distributor pumps and unit pumps.

Metal Working Fluid Test Rig

Turnkey machining-centre-based MWF test rig with 18 live-logged parameters and auto concentration control.

10,000 Ton Extrusion Press

Turnkey 10,000 tonne aluminium extrusion plant — pre-heat, extrusion, cooling and 500 tonne stretching.

EV Charger Test System

EV charger test system — grid simulation, bidirectional battery emulation to 1,000 V, IEC 61851/ISO 15118 conformance.

E-Motor Test Bench

4-quadrant back-to-back e-motor dyno to the 350 kW class with torque-flange metrology and efficiency mapping.

EV Battery Test System

Regenerative cell cyclers with built-in EIS, module/pack cycling to 1,000 V, drive-cycle replay and BMS validation.

Chassis Dynamometer

4×4 independent wheel drive chassis dynamometer, 48 inch rolls, 250 km/h, electric inertia simulation 150-5,500 kg.

Fired Billet Reheating & Heat Treatment Furnace

Gas/oil-fired rotary-hearth and chamber furnaces for billet re-heating to ~1250°C and heat treatment, ±10°C uniformity proven by TUS.

High-Voltage Test Bench

AC/DC withstand, lightning impulse, partial discharge and tan-delta testing of transformers, switchgear, insulators and cables.

Shot Blasting & Peening System

Airless wheel or air-blast surface preparation to ISO 8501, and Almen-controlled shot peening for compressive stress and fatigue life.

Non-Destructive Testing & Inspection System (NDT)

Radiography, ultrasonics, eddy-current, magnetic-particle and dye-penetrant inspection systems finding flaws without cutting the part open.

Circuit-Breaker & Relay Test Bench

Primary-injection and secondary relay test bench verifying circuit-breaker and protective-relay tripping, timing and contact resistance.